Accessories
Choose from a wide selection of accessories to customize products and systems to exacting specifications.

Extended motor mounting configuration Double shaft extension Custom output shafts (see output shaft section) Custom mounting covers Cone, Positive stop and Coil spring brakes

Cooling fans Needle bearings Internal clutch Thermal overload protection Custom leads, terminals and connectors

OUTPUT SHAFTS
Merkle-Korff offers standard and custom output shafts to meet a varying range of customer specifications (see Option Section.)

LEAD LENGTHS, TERMINATIONS AND HARNESSES
Merkle-Korff offers lead lengths and a wide range of wire colors. Connectors and custom wiring is designed to customer specifications, system-ready.

TACHOMETERS AND ENCODERS

Magnetic Tachometers 16 pole AC tachometers (8 cycles/revolution) are available with motor models EYQM and CYMM Tach voltage: EYQM 1.8 vrms per 1000 rpm typical

Tach voltage: CYMM 3.3 vrms per 1000 rpm typical Addition of the tachometer will add approximately .50" (12.7 mm) to motor length on Model CYMM and up to .30" (7.6 mm) on Model EYQM

BRAKES
	CONE BRAKE The Cone Brake features a larger diameter friction disc for more rapid deceleration and holding torque.
	POSITIVE STOP BRAKE The Positive Stop Brake can automatically stop the rotation of the output shaft. This brake also has the ability to hold heavier loads at rest.
	COIL SPRING BRAKE The Coil Spring Brake reduces over-travel of the output shaft while holding lighter loads in position.
	FANS AND FAN BLADES Merkle-Korff offers a variety of fans and fan blades to effectively satisfy customer cooling needs. Where temperature is an issue or cooling is required for continuous applications, Merkle-Korff has a system to satisfy the need.
	PC BOARDS, SWITCHES AND FILTERING Merkle-Korff offers an extensive array of PC Boards, Switches and Filtering which enables customers to properly interface with existing electronic systems.